How A 3 Way Refrigerator Works
How To Use The 3 Way Refrigerator
At first, you should put it in a horizontal piston for 6 hours even before you proceed to plug it. After this, ensure that the temperature is at the lowest point and test it using either the 12 V or 110 V. Note that you should not use both voltages at the same time.
It is also essential to ensure that the place is well ventilated before use to avoid any accidents. Do not expect any sounds because this fridge works very silently.
How The Gas Functions
The gas used in this refrigerator should be none other than propane gas. Ensure that you only use propane gas; otherwise, it may lead to dire consequences. The pressure regulator provided is the only one that will function with this refrigerator because its nozzle has a small diameter of 0.0011 inches. Before you turn the fridge on, ensure that all the valves are open.
Cleaning The Chimney
The 3 Way refrigerator’s chimney should be clean to get rid of the carbon that accumulates. You can use either a brush or deflector to clean and ensure that the refrigerator functions efficiently.
How To Ignite
Different methods are to be followed depending on whether you will be using the electric or the gas.
To use the electric, you will plug it, and it will start functioning. If you are using gas, follow the following steps:
- Ensure the thermostat knob is at a minimum. While pushing the ignitor, also do the same for the valve button and ensure you have it pulled down.
- The flame indicator gauge will move to green, and after that, you can release the ignitor. However, continue holding the safety valve button for some time.
- Release the safety valve button and now check if the flame is lighting.
- Adjust the thermostat knob to a temperature of your choice.